F4263D

The IC-F3263D series provides rugged protection against dust and water that is equivalent to IP67. The radio can withstand 1m depth of water for 30 minutes.

The man down function* automatically sends an emergency signal when the transceiver is left in a horizontal position. The lone worker function also can transmit an emergency signal when the radio is not operated for a preset period. These emergency signals can be sent with GPS position data* to alert your co-workers or dispatch of any potential trouble. * Depending on version.

The built-in BTL amplifier doubles the audio output power and the large 40mm speaker delivers loud 800mW (typ.) audio to receive all calls under noisy environments.

The IC-F3263D series provides NXDN™ CAIbased IDAS digital mode operation. It is also compatible with NXDN™ Type-D multi-site trunking. The following IDAS features are programmable.

• Individual/group call
• Individual ID and talkgroup ID memories
• Status message
• GPS
• Radio check
• Call alert
• Emergency
• Block decode
• SDM (Short Data Message)
• Stun, kill and revive
• Remote monitor
• Call log
• Digital voice scrambler
• RAN (Radio Access Number)

2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions. The radio stun and kill functions disable a radio over the air and the revive function restores the stunned radio.

The built-in MDC signaling provides the following selective calling and ANI features.

• PTT ID
• Radio strun/revive
• Status message/request
• Emergency, emergency mic monitoring
• Radio check
• 500 aliases
• Call alert
• SelCall

The IC-F3263D series can detect both analogue and IDAS conventional signals and automatically selects the transmission mode to reply to the received call.

The built-in inversion voice scrambler* provides secure conversation in analogue mode. When using IDAS digital mode, the digital voice scrambler provides a 15-bit key (about 32,000 codes) as standard. * Inversion voice scrambler is not compatible with UT-109R/UT-110R voice scrambler.

Your current position data can be attached to a voice or data (SDM, status or emergency signal) transmission and can be sent to dispatch stations*. * Depending on version. * To show the received position data, an external PC application is required.

The new 14-pin accessory connector enhances audio output capabilities with the built-in BTL amplifier. The optional HM-184 speakermicrophone has a 1000mW (typ.) audio output for loud and clear communications.

Using a large full dot-matrix LCD (32 × 18 mm), the IC-F3263D series shows two lines of easy-to-read text messages. The bottom row shows assigned functions to the [P0] to [P3] buttons.

Built-in GPS type 10.5 hours (approx.) 11 hours (approx.) Non GPS type 12 hours (approx.) 12.5 hours (approx.) * Typical operation in 5:5:90 duty cycle, power save on.When the radio is not operated for a preset period, a warning beep will sound, alerting the radio user to check in. If the radio user does not check in before the preset time runs out, then the radio automatically sends out an emergency signal.

• 512 memory channel with 128 zones
• 5W output power both in VHF and UHF
• Basic LTR™ mode operation
• CTCSS/DTCS encoder/decoder
• MIL-STD 810 G rugged construction
• 8 DTMF autodial memories
• Busy channel lockout, repeater lockout
• Voting scan
• Time-out timer
• Low battery alert
• Surveillance function
• Power on password
• Talk around function
• Escalating alarm

(* = Analog mode only)